| |
Application of caprolon
|
|
Caprolon (polyamide-6 block, PA-6, PA 6 block) is a multifunction material of constructional and antifrictional purpose. It is effectively applied in the metallurgical, pulp-and-paper, chemical, food, machine-tool constructing industries, in shipbuilding, an agriculture and power engineering at manufacturing:
- friction bearings, guids and bushes of units of friction, working at loading up to 25 MPa, at oiling or dry;
- pulleys, blocks and rollers of load-lifting mechanisms with traction effort up to 30 tonns;
- cases, corbels, centres of wheels and other details to which increased requirements on crash-worthiness are shown;
- gear, sprockets and worm-wheels of various devices and mechanisms with the purpose of decrease in noise level and vibration (up to 15 decibel);
- details of compression and glands for high-pressure systems (up to 500 atm);
- chopping boards (boning) for the food-processing industry;
- replacing steel, bronze, babbit, other nonferrous metals and alloys, and also nylon, laminated bakelite insulation, teflon;
- greatly excel in physicomechanical characteristics ertalon, kapron, polypropylene, polythene.
|
Address: Demidovskaja str., 63, Tula, 300002, Russia. Tel.: +7 (4872) 34-58-84 Tel./ fax: +7 (4872) 34-57-56.
E-mail: alvis@kaprolon-alvis.ru. Web-representation: www.kaprolon-alvis.ru.
up
|
|
| |
New marks of caprolon
|
|
STS "Alvis" offers unique constructional, heat- and sound-proof material "Ïåí-Àí"™. It of racks in sea water, combustive-lubricating liquids, organic solvents. At burning does not allocate toxic substances. It can be used in construction, in furniture manufacture, in private life.
"Polyfoam "Ïåí-Àí" in connection with high thermalchemical parameters, low water absorption, high durability (both at compression, and at a bend) and the increased heat-resistance, can be applied first of all in designs for which the increased durability thermal protection material is required, for example at warming garrets and roofings, for thermal protection designs with raised temperature and moisture conditions (in baths and laundries), for thermal protection pipelines."
From the conclusion "Scientific research institute "Ìîññòðîé" Moscow |
|
| STS "Alvis" produce decorative caprolon (polyamide-6 block) simulating a natural stone. Original and stylish gifts! |
|
Slippy - constant of friction less than 0,1 - marks: caprolon-42, caprolon 5-3-0, etc. (oily caprolon, plumbagofilled caprolon).
It is applied: in the units of friction working at greater loadings; in places where high wear-resistance is required.
Wear-resistance in 3 times above, than at babbit.
Soft - hardness at a level of rubber - marks from Ì-50 up to Ì-250.
It is applied: wearproof, chemically proof gaskets, sealing rings; linings under beam cutter; scrapers for conveyors. |
|
We offer glassfilled caprolon of marks ÑÒÏ with the increased physicomechanical parameters and high thermostability for manufacture of high-loaded details.
Stably works at temperature up to 160°Ñ, quickly maintains rise in temperature up to 200°Ñ.
Release of any marks of caprolon in the form of plates thickness 4÷8 mm and more is possible.
|
|
| Mark of caprolon |
Characteristic |
Area of application |
Caprolon Ó;
Caprolon
from Ì-20 up to Ì-40
|
Increased impact strength. |
Gear wheels, pulleys, sprockets, screws, load-carrying rollers, cylinders, guides, bushings, power details |
Caprolon
from Ì-50 up to Ì-250
|
Hardness at a level of rubber at high chemical stability oil, oils, gasolines, other hydrocarbon. |
Sealing rings, hydraulic glands, conveyor belt scrapers, bushings of brush rollers, linings under beam cutter, covering of shafts, wheel for carriages. |
| Caprolon-42 |
Low constant of friction, the increased wear-resistance. Kinematic pairs from caprolon, filled by plumbago (marks 42, 45, etc.), by molybdenum disulfide (mark 5-1-5, 5-3-0, etc.), can work without lubricant. |
Bushings, bearings, slipways, guides, sports stock. |
| Caprolon-45 |
| Caprolon-410 |
| Caprolon 5-1-5 |
| Caprolon 5-1-0 |
| Caprolon 5-3-0 |
|
Address: Demidovskaja str., 63, Tula, 300002, Russia. Tel.: +7 (4872) 34-58-84 Tel./ fax: +7 (4872) 34-57-56.
E-mail: alvis@kaprolon-alvis.ru. Web-representation: www.kaprolon-alvis.ru.
up |
|
Services of STS "Alvis"